Commercial Grade Antennas for Hi-Fi Tuners and Home Cinema Receivers

HD Series Matched AM Loop Antenna

This Antenna is ideal for all Metropolitan AM receive sites and installations requiring a robust weatherproof antenna.

It is supplied with a Marine grade HD Mount and can be used with RG-6Quad Cable up to 30m long, it is easy to configure with internal DIP Switches and offers wideband AM reception (Frequency range 520 to 1725KHz)

(Order Code C-LOOP-HDMATCH ) PDF

HD Series Amplified Wideband AM Loop Antenna

This Antenna is ideal for all AM receive sites and installations that require a boosted AM signal, like multi-receiver systems and headends.

It is supplied with a Marine grade HD Mount and can be used with RG-6Quad Cable up to 100m long, the antennas offers wideband AM reception (Frequency range 520 to 1725KHz)

(Order Code C-LOOP-HDWAM ) PDF

This Antenna requires a DC Injector and power supply

(Order Code C-RX-INJ)

HD Series Amplified Wideband AM Loop Antenna with FM Combiner

This antenna can also be optioned with an integrated FM combiner as an FM input to the loop. Both AM & FM signals then share the one coaxial cable to the receive system.

(Order Code C-LOOP-HDWAM-FM ) PDF

This Antenna requires a standard DC Injector and 12 volt power supply. Note AM & FM output on the one connector.

(Order Code C-RX-INJ)

There is an optional DC Injector and 12 volt power supply which has seperate AM and FM outputs.

(Order Code C-RX-INJ-AM/FM )

HD Series Off-Air Monitoring Loop Antenna

An outdoor passive, tuned, Single Station Loop Antenna, which is ideal for building installations and Head-end Receivers. Designed for a single AM frequency and a narrow band segment around it, eg. A loop made and tuned for 693 KHz will cover the range 640 KHz to 740 KHz at a reduced but usable signal level.

Supplied with a Marine grade HD Universal U-Bolt L-Mount and can be used with 75 Ohm RG-6Quad Cable up to 300m long, these antennas offer narrow band AM reception. The Operating Frequency is chosen with your order, from the range 50KHz to 2000 KHz

Note: 50 Ohm output impedance is available on request

(Order Code C-LOOP-HDNFxxxx ) PDF note xxxx=Freq. KHz

See our Antenna test procedures here Testing Antennas

HD Series Single Station Amplified Loop Antenna

An outdoor amplified, tuned, Single Station Loop Antenna, which is ideal for building installations and Head-end Receivers in low signal and Regional areas. Designed for a single AM frequency and a narrow band segment around it, eg. A loop made and tuned for 693 KHz will cover the range 640 KHz to 740 KHz at a reduced but usable signal level.

(Order Code C-LOOP-HDSMxxxx ) PDF note xxxx=Freq. KHz

This Antenna requires a standard DC Injector and 12 volt power supply.

(Order Code C-RX-INJ)